Home > Uncategorized > I have a new(ish) printer!

I have a new(ish) printer!

My old printer has been acting up for a while. Something was wrong with the paper feeder that made it feed jerkily so that there were gaps and overlaps in the printout, and that made the printer act as though there were a paper jam when there wasn’t, so that I couldn’t get past the paper jam warning on the printer’s own screen to work the controls. No matter, then; I had software on my computer that let me control the scanner function and keep using it for that purpose, at least. But it turns out that software was dependent on Adobe Flash, so it stopped working at the start of this year. No matter, then; at least I could still control the printer from Word or Acrobat or whatever. Except that when I tried that, it wouldn’t print at all!

If not for the pandemic, I might’ve tried taking the printer in for repairs before replacing it, but I figured it probably wouldn’t cost much more to get a new one. So I went looking online. I hit a snag when I realized that all the modern printers from the makers of my old one require a software app that isn’t compatible with my old refurbished Windows 7 laptop. So I had to look into other brands, and I found an older model that was compatible and not too expensive. I actually thought I’d be able to get it for under 40 bucks from a local store, but then I noticed it didn’t have a “Buy” button, just a “Notify me when it’s available” button. So I ended up getting it through an Amazon vendor for 100-plus. Not great, but at least I’m in a position to afford it now.

So the printer came yesterday, but I didn’t feel like going to the trouble of installing it until today. I almost hit another snag, since I keep my printer up on top of my computer hutch and I wasn’t sure the supplied cords would reach. The power cord turned out to be just long enough, but the USB cord (since it’s not wireless, being old and cheap) was way too short. Luckily, I still have an old USB hub/extension cord thingy that I replaced years ago with a faster one. It seems to work just fine despite the slower data rate. The printer doesn’t seem to work that fast, but I think that’s more of a hardware issue. It’s not like I use my printer much, so it doesn’t need to be great, just functional.

So now I finally have a working printer/scanner again, which is good. The reason I decided I needed to act now was that tax time is coming up and I wanted to be able to scan and upload my tax forms. I should be able to do that now. Although I’ll have to remember that the scanner plate has the reverse orientation from my previous one — the top of the document goes on the left side now. Also the control buttons are on the top instead of the front, which isn’t great for a printer I keep up high.

Also, I think the printer control software slows down my browser after I use it, heaven knows why, but closing and restarting the browser clears it up. Another thing to remember. The software itself is a bit annoying, putting up this whole weird control panel on my screen that it was hard to figure out how to turn off, but at the same time, the controls seem more easily accessible and intuitive than the previous printer’s control software.

Aside from these minor snags, the installation went pretty smoothly. Yet I’m having a weird reaction. Part of the reason I waited a day to install it was because I was worried that it might be difficult and frustrating. I deal poorly with tech going wrong, or just in general with new problems I can’t figure out. I tend to get really flustered by such things. Yet even though the installation went fairly smoothly, with nothing going wrong aside from a couple of setbacks I quickly solved, I find myself feeling emotionally drained and edgy, much as I’d feel if it had been hard and frustrating. I didn’t feel upset or agitated while I was installing the printer, but I’m kind of feeling the aftereffects as if I had. It’s as if my brain and hormones reacted to what I feared would happen instead of what actually happened. Weird.

Meanwhile, as long as I was getting stuff from Amazon, I finally got around to buying a new toilet flapper valve to deal with the “ghost flush” problem I talked about back in August, i.e. the slow leakage through the deteriorating flapper that caused the tank to slowly drain and spontaneously refill every few hours. That problem has come and gone over the past few months, but it’s been fairly steady lately, so I was glad for the chance to fix it at last. I was surprised by how decayed the old flapper had gotten; when I drained the tank and pulled it out, the crumbly rubber stuck to my fingers like I was holding a moist brownie, and there were cloudy wisps of black particulates dislodged into the surrounding water when I moved it. So definitely way, way overdue for replacement. The new one fit perfectly and seems to be working fine now, although it didn’t quite close at one point last night and I realized I’d hooked up the chain a bit too loosely so that it got caught underneath the valve. I realized that was why the previous chain was attached over the top of the lever instead of the bottom, so I adjusted it accordingly.

So bit by bit, things in my household are getting long-overdue fixes. There are still some other fixes needed, like a new desktop keyboard and car repairs. But those can wait until more money comes in over the year ahead.

Categories: Uncategorized Tags:
  1. February 6, 2021 at 4:52 am

    My nerves don’t like setting electronics, either. It is stressful.

  2. Byron Bailey
    February 6, 2021 at 2:48 pm

    Hi Christopher,
    Not sure if you’d be interested but I think I can help you out on a wireless keyboard and mouse. I have a Logitech keyboard and mouse I’ll happily send you. It’s pretty much new (just used for a few months until I had to replace my old computer) and has just been sitting around. It still works beautifully. Anyway, please let me know if you’re interested and I’ll get it in the mail to you on Monday.
    Byron

    • February 6, 2021 at 3:39 pm

      Thanks for the offer, but I don’t use a mouse, due to shoulder tendinitis. I have an ergonomic keyboard with a trackpad in the middle, and it’s very hard to find that specific design. I’m planning to buy a replacement of the same model, when I have a bit more money to spare.

  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: